No Cover Image

Journal article 1149 views 309 downloads

The influence of phase angle, strain range and peak cycle temperature on the TMF crack initiation behaviour and damage mechanisms of the nickel-based superalloy, RR1000

Jonathan Jones, Mark Whittaker Orcid Logo, Robert Lancaster Orcid Logo, Stephen Williams

International Journal of Fatigue, Volume: 98, Pages: 279 - 285

Swansea University Authors: Jonathan Jones, Mark Whittaker Orcid Logo, Robert Lancaster Orcid Logo

  • jones2017.pdf

    PDF | Accepted Manuscript

    Released under the terms of a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND).

    Download (1.41MB)

Check full text

DOI (Published version): 10.1016/j.ijfatigue.2017.01.036

Abstract

Thermo-mechanical fatigue (TMF) tests including 0°, 90°, -90°, 45° -135° and -180°, phasing (φ) between mechanical loading and temperature were undertaken on a polycrystalline nickel-based superalloy, RR1000. Mechanical loading was employed through strain control whilst 300-700 °C and 300-750°C ther...

Full description

Published in: International Journal of Fatigue
ISSN: 0142-1123
Published: Elsevier BV 2017
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa31841
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: Thermo-mechanical fatigue (TMF) tests including 0°, 90°, -90°, 45° -135° and -180°, phasing (φ) between mechanical loading and temperature were undertaken on a polycrystalline nickel-based superalloy, RR1000. Mechanical loading was employed through strain control whilst 300-700 °C and 300-750°C thermal cycles were achieved with induction heating and forced air cooling. Mechanical strain ranges from 0.7 to 1.4% were employed. Results show that, for the strain ranges tested, TMF life is significantly affected by the employed phase angle. Furthermore the strain range and peak cycle temperature used has a substantial influence on the significance of dominant damage mechanisms, and resultant life. Various metallographic examination techniques have outlined that the dominant damage mechanisms are creep deformation at higher temperatures and early cracking of oxide layers at lower temperatures.
Keywords: Phase Angle; Thermo-mechanical Fatigue; Superalloys
College: Faculty of Science and Engineering
Start Page: 279
End Page: 285

Similar Items