No Cover Image

Conference Paper/Proceeding/Abstract 1250 views 333 downloads

Increased Corrosion Resistance of Zinc Magnesium Aluminum Galvanised Coating through Germanium Additions

Shahin Mehraban, Jack Malone, Nicholas Lavery Orcid Logo, James Sullivan Orcid Logo, David Penney Orcid Logo, Steve Brown

ECS Transactions, Volume: 75, Issue: 30, Pages: 1 - 15

Swansea University Authors: Nicholas Lavery Orcid Logo, James Sullivan Orcid Logo, David Penney Orcid Logo, Steve Brown

Check full text

DOI (Published version): 10.1149/07530.0001ecst

Abstract

The corrosion performance of a Zinc Magnesium Aluminium alloy was shown to improve through the addition of a quaternary element, Germanium. Improved corrosion resistance can be attributed to microstructural changes in the alloy due to Ge addition while in the molten state. The proportion of the most...

Full description

Published in: ECS Transactions
ISSN: 1938-6737 1938-5862
Published: 2017
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa32175
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: The corrosion performance of a Zinc Magnesium Aluminium alloy was shown to improve through the addition of a quaternary element, Germanium. Improved corrosion resistance can be attributed to microstructural changes in the alloy due to Ge addition while in the molten state. The proportion of the most active MgZn2 phase which has been shown to initiate the corrosion reaction in a ZMA alloy was reduced thorough the formation of Mg2Ge crystals. The formation of crystal structures within the alloy also increased the heterogeneous nucleation of the primary zinc phase. The Scanning Vibrating Electrode Technique (SVET) was used to measure the rate of corrosion, anode life and zinc loss of the alloy samples. The results showed a zinc loss of around 50% when compared to standard ZMA alloy without Ge addition.
College: Faculty of Science and Engineering
Issue: 30
Start Page: 1
End Page: 15