Journal article 1100 views
High-speed electro-thermal modelling of a three-phase insulated gate bipolar transistor inverter power module
,
Petar Igic
International Journal of Electronics, Volume: 97, Issue: 2, Pages: 195 - 205
Swansea University Authors:
Zhongfu Zhou , Petar Igic
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1080/00207210903478077
Abstract
In this article, a high-speed electro-thermal (ET) modelling strategy to predict the junction temperature of insulated gate bipolar transistor (IGBT) devices of a three-phase inverter power module is presented. The temperature-dependent power loss characteristics of IGBT and diode devices are measur...
| Published in: | International Journal of Electronics |
|---|---|
| ISSN: | 1362-3060 |
| Published: |
2010
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa5785 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
In this article, a high-speed electro-thermal (ET) modelling strategy to predict the junction temperature of insulated gate bipolar transistor (IGBT) devices of a three-phase inverter power module is presented. The temperature-dependent power loss characteristics of IGBT and diode devices are measured and stored in lookup tables, which replace the conventional complicated physics-based compact models. An inverter is modelled as a voltage controlled voltage source, which allows the inverter-based power train simulation to be carried out in the continuous time domain with a large simulation time-step (1 ms). Using the simulated sinusoidal voltage and current components of the inverter output, the given pulse width modulation mode, the conduction time (duty ratio) and the current of the devices are extracted. Based on the lookup tables, on-times and conduction currents of devices, the average power loss over each simulation time-step is calculated, which is then fed into the inverter thermal model to predict the devices' temperatures. The advantage of the proposed model is that an accurate ET simulation of inverter for long real-time (many minutes) operation can be carried out within an acceptable computational time using a standard modern personal computer. Both simulation and experimental validation have been carried out, and an excellent agreement has been achieved between the simulation and experimental data. |
|---|---|
| Keywords: |
inverter power module, electro-thermal simulation, power losses |
| College: |
Faculty of Science and Engineering |
| Issue: |
2 |
| Start Page: |
195 |
| End Page: |
205 |