Journal article 428 views
Pressure-drop and kinematics of viscoelastic flow through an axisymmetric contraction–expansion geometry with various contraction-ratios
M. Pérez-Camacho,
J.E. López-Aguilar,
F. Calderas,
O. Manero,
M.F. Webster,
Michael Webster 
Journal of Non-Newtonian Fluid Mechanics, Volume: 222, Pages: 260 - 271
Swansea University Author:
Michael Webster
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1016/j.jnnfm.2015.01.013
Abstract
One of the relevant benchmark problems in pressure-driven flows, that of flow through an axisymmetric expansion-contraction geometry, is addressed in this study. Three fluids have been considered: a Newtonian, Boger and a shear-thinning polymer solution. Particular attention is given to the pressure...
| Published in: | Journal of Non-Newtonian Fluid Mechanics |
|---|---|
| Published: |
2015
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa24187 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
One of the relevant benchmark problems in pressure-driven flows, that of flow through an axisymmetric expansion-contraction geometry, is addressed in this study. Three fluids have been considered: a Newtonian, Boger and a shear-thinning polymer solution. Particular attention is given to the pressure-drop and kinematics obtained in a flow apparatus specifically designed for various contraction-ratios (2:1:2, 4:1:4, 6:1:6, 8:1:8, 10:1:10). Both viscoelastic fluids present large magnitudes of normal stress under simple shear flow. The three fluids have the same viscosity at low shear-rates. The Boger fluid (polyacrylamide in a syrup-water solution) possesses a constant viscosity over a wide range of shear-rates. The shear-thinning fluid also has a wide range of first Newtonian plateau before the onset of shear-thinning. Findings for the Boger fluid reflect, initially, a decreasing pressure-drop below the Newtonian reference line (excess pressure-drop lower than unity), followed by values larger than one as the contraction-ratio increases. This can be explained on the basis of the extensional viscosity behaviour in the contraction section of the geometry. The shear-thinning polymer solution (HASE-type associative polymer) shows a reduction in epd below the Newtonian curve for small contraction-ratios (due to shear-thinning). However, in more abrupt contractions, the extensional flow behaviour dominates the shear-thinning effects: first attaining Newtonian behaviour (producing an epd of one), and then, showing values larger than unity as the contraction-ratio becomes more severe. Kinematic fields illustrated by flow visualization reveal several different sizes of the corner-vortex, which are related to the relative contributions from the first normal stress difference (N1) and extensional stress throughout the geometry. Transitions from lip-to-corner vortex are related to the transition from shear-dominated to extension-dominated flows. Experimental data, for the Boger fluid on 4:1:4 contraction-ratio, are contrasted against numerical simulation results for a constant-shear-viscosity/extension-hardening FENE-CR model. Trends demonstrate qualitative agreement on epd and vortex activity, which also reveal an interesting interplay between N1 and extensional viscosity. |
|---|---|
| Keywords: |
Pressure drop Flow kinematics Contraction–expansion Viscoelastic fluids |
| College: |
Faculty of Science and Engineering |
| Start Page: |
260 |
| End Page: |
271 |