Journal article 1401 views 459 downloads
The contribution of small punch testing towards the development of materials for aero-engine applications
Theoretical and Applied Fracture Mechanics, Volume: 86, Pages: 69 - 77
Swansea University Authors:
Roger Hurst, Robert Lancaster , Spencer Jeffs
, Martin Bache
-
PDF | Version of Record
Released under the terms of a Creative Commons Attribution License (CC-BY).
Download (3.12MB)
DOI (Published version): 10.1016/j.tafmec.2016.07.013
Abstract
This paper, invited for presentation at the 33rd Meeting of the Spanish Group on Fracture and Structural Integrity, March 2016 in San Sebastian, Spain, reviews the recent work carried out in the authors’ laboratory, addressing the elucidation of tensile and creep characteristics of materials for aer...
Published in: | Theoretical and Applied Fracture Mechanics |
---|---|
ISSN: | 0167-8442 |
Published: |
2016
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa29302 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
This paper, invited for presentation at the 33rd Meeting of the Spanish Group on Fracture and Structural Integrity, March 2016 in San Sebastian, Spain, reviews the recent work carried out in the authors’ laboratory, addressing the elucidation of tensile and creep characteristics of materials for aero engine components. Two specific applications of the Small Punch (SP) test assessment technology were identified, the first of these takes on board the unique potential of the SP test for testing small quantities of materials which are either in development or through their directional structure cannot easily be produced in quantities which would allow conventional mechanical testing. This goal also required the development and procurement of new SP test facilities capable of operation up to 1150 °C. The examples given in this paper are TiAl intermetallic alloys and nickel based single crystals, all studied utilising the Code of Practice for SP Creep Testing. The second application illustrates the use of SP testing to assess both the tensile and creep properties of additive layer manufactured (ALM) alloys such as IN718 and Ti-6Al-4V using the Code of Practice for SP Tensile and Fracture Testing. Due to the unavailability of sufficient material to facilitate conventional testing for comparison of materials property data, SP testing is unable to provide absolute data for all of these applications, nevertheless the ranking capabilities of SP testing are demonstrably proven. |
---|---|
Keywords: |
Small punch; Review; Aero-engine materials |
College: |
Faculty of Science and Engineering |
Start Page: |
69 |
End Page: |
77 |