No Cover Image

Journal article 681 views 247 downloads

A study of low cycle fatigue life and its correlation with microstructural parameters in IN713C nickel based superalloy

J. Salvat Cantó, S. Winwood, K. Rhodes, S. Birosca, Soran Birosca Orcid Logo

Materials Science and Engineering: A, Volume: 718, Pages: 19 - 32

Swansea University Author: Soran Birosca Orcid Logo

Abstract

Up to date, IN713C Nickel-based superalloy has been continued to be the best alloy candidate for turbocharger wheel applications due to its adequate fatigue property and resistance to degradation under harsh operating environments. Throughout this study, three different batches of as-cast IN713C nic...

Full description

Published in: Materials Science and Engineering: A
ISSN: 09215093
Published: 2018
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa38885
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: Up to date, IN713C Nickel-based superalloy has been continued to be the best alloy candidate for turbocharger wheel applications due to its adequate fatigue property and resistance to degradation under harsh operating environments. Throughout this study, three different batches of as-cast IN713C nickel based superalloys with different microstructures including columnar, equiaxed and transition microstructures were investigated. Strain control Low Cycle fatigue (LCF) tests were conducted for the three different microstructures, achieving fatigue life between 100 and runout at 100,000 cycles, depending on the testing parameters. The fracture mechanics and failure mechanism were correlated to the alloy's microstructure, texture and chemical composition under various LCF conditions using optical microscopy, SEM, EDX and EBSD. In the current study an exact correlation between alloy's microstructure/microtexture and LCF endurance is established. The results showed that equiaxed microstructure has a superior fatigue life than the transition microstructure by 10% and columnar microstructure by > 200% at a given temperature and strain rate. This large discrepancy was mainly due to the grain size differences between the studied microstructures. Here, it was evidenced that the grain size controls the dendrites length. It is also demonstrated that all microstructures exhibited a longer fatigue life at room temperature than at 650 °C, doubling or tripling the fatigue life of the tested IN713C. Furthermore, the high presence of precipitates between dendritic arms in all three microstructures was found to have great influence on crack propagation path. It was apparent that segregated carbides in between dendritic arms caused secondary crack initiation and crack path undulations during the LCF tests.
Keywords: Fatigue, IN713C, microstructure, investment casting, superalloy
College: Faculty of Science and Engineering
Start Page: 19
End Page: 32