Journal article 978 views 191 downloads
A spatially nonlinear generalised actuator disk model for the simulation of horizontal axis wind and tidal turbines
,
Ian Masters ,
Arindam Banerjee,
James H. VanZwieten
Energy, Volume: 194, Start page: 116803
Swansea University Authors:
Matthew Edmunds, Alison Williams , Ian Masters
-
PDF | Version of Record
Released under the terms of a Creative Commons Attribution License (CC-BY).
Download (4.12MB)
DOI (Published version): 10.1016/j.energy.2019.116803
Abstract
Efficient numerical simulation of renewable energy wind and tidal turbines is important for the layout of devices in farms. Computational Fluid Dynamics (CFD) approaches using blade geometry resolved models are computationally expensive. Therefore, most array models use source term representations o...
| Published in: | Energy |
|---|---|
| ISSN: | 0360-5442 |
| Published: |
Elsevier BV
2020
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa53115 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Efficient numerical simulation of renewable energy wind and tidal turbines is important for the layout of devices in farms. Computational Fluid Dynamics (CFD) approaches using blade geometry resolved models are computationally expensive. Therefore, most array models use source term representations of rotors, normally actuator disk, actuator line or blade element disk. Unfortunately, these methods rarely capture enough physics to accurately predict power and at the same time correctly characterise the wake velocity field and turbulent structures.This study describes a new Generalised Actuator Disk CFD model (GAD-CFD), that achieves the required accuracy for the simulation of horizontal axis wind and tidal turbines and their wakes. This new method combines a finite volume CFD code with additional source terms representing the rotor, including: correct consideration of losses along the foil by modification of the distribution of downwash; a concise downwash distribution computation; recognition that foil cross section varies along the length; dynamically changing Reynolds numbers and the application of a tip radius correction. Also reported are foil lift and drag coefficients and their variation with thickness, surface roughness and Reynolds number, which is necessary for the proper characterisation the whole rotor.The effectiveness of this approach is investigated and validated against two experiments, and demonstrates improvements over traditional source term methods, in particular the correct CFD approach to tip losses and consequent downstream wake prediction. This study provides confidence in application to both small scale flume studies and large scale array deployments in both the marine and wind environments. |
|---|---|
| Keywords: |
horizontal axis turbine, Finite volume, Hydrodynamics, Aerodynamics, Incompressible flow |
| College: |
Faculty of Science and Engineering |
| Funders: |
UKRI, EP/N02057X/1 |
| Start Page: |
116803 |