Journal article 245 views 104 downloads
The effect of near-surface plastic deformation on the hot corrosion and high temperature corrosion-fatigue response of a nickel-based superalloy / Hollie Cockings, Ben Cockings, Will Harrison, Mike Dowd, Karen Perkins, Mark Whittaker, G.J. Gibson
Journal of Alloys and Compounds, Volume: 832
PDF | Accepted Manuscript
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license.Download (5.49MB)
Surface treatments such as shot peening to inhibit fatigue crack initiation are essential processes when designing gas turbine components for aerospace applications. It is therefore crucial to understand the effects of shot peening in representative service environments. Here, the influence of surfa...
|Published in:||Journal of Alloys and Compounds|
Check full text
No Tags, Be the first to tag this record!
Surface treatments such as shot peening to inhibit fatigue crack initiation are essential processes when designing gas turbine components for aerospace applications. It is therefore crucial to understand the effects of shot peening in representative service environments. Here, the influence of surface treatment on the high temperature corrosion fatigue response of a polycrystalline nickel-based superalloy is considered, an area that has not previously been explored. Two shot peening conditions; 110H 7A 200% and 330H 7A 200%, along with a polished surface were chosen. Specimens were salted and exposed to SO2 gas during fatigue testing at 700 °C. A range of novel techniques including SEM, EBSD and axial chromatism profilometry were used to analyse the near surface cold work and surface condition before and after testing. EBSD local misorientation maps, paired with an increase in corrosion-fatigue life, suggest that a greater depth of cold work produced by the smaller shot size (110H), is providing a significant benefit in terms of hot corrosion and corrosion-fatigue performance. This paper concludes that the presence of a substantial layer of cold work is required to account for any metal loss due to the effects of hot corrosion. It is also evident that cold work hinders fatigue crack initiation and delays the onset of pit to crack transition.
High-temperature alloys, Surfaces and interfaces, Corrosion, Oxidation, Microstructure, Mechanical properties
College of Engineering