Journal article 699 views 140 downloads
Volumetric assessment of fatigue damage in a SiCf/SiC ceramic matrix composite via in situ X-ray computed tomography
Journal of the European Ceramic Society, Volume: 40, Issue: 11, Pages: 3788 - 3794
PDF | Accepted Manuscript
©2020 All rights reserved. All article content, except where otherwise noted, is licensed under a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND)Download (918.39KB)
To enhance the understanding of matrix cracking and damage progression on the macroscopic scale, within a 0/90° fibre reinforced SiCf/SiC ceramic matrix composite (CMC), X-ray computed tomography (XCT) imaging and analysis have been performed in conjunction with a commercially available in-situ mech...
|Published in:||Journal of the European Ceramic Society|
Check full text
No Tags, Be the first to tag this record!
To enhance the understanding of matrix cracking and damage progression on the macroscopic scale, within a 0/90° fibre reinforced SiCf/SiC ceramic matrix composite (CMC), X-ray computed tomography (XCT) imaging and analysis have been performed in conjunction with a commercially available in-situ mechanical loading device. CMC test coupons were subjected to tensile cyclic loads and inspected using XCT without removal from the tensile loading device. Attempts to measure and quantify the resulting damage using volumetric image analysis techniques are presented, by characterising the crack network from XCT images acquired at both the maximum and minimum load condition during selected fatigue cycles. The XCT detection of significant crack development within the first loading half-cycle shows good agreement with cumulative acoustic emission energy data recorded under similar test conditions. The results are seen as an important step towards correlating the damage behaviour detected via different NDE and health monitoring techniques.
Ceramic matrix composites; In-situ X-ray computed tomography; Matrix cracking; Damage accumulation; Fatigue
Faculty of Science and Engineering