Journal article 259 views
Disparity in recrystallization of α- & γ-fibers and its impact on Cube texture formation in non-oriented electrical steel
Diween Hawezy,
Soran Birosca
Acta Materialia, Volume: 216, Start page: 117141
Swansea University Author: Diween Hawezy
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1016/j.actamat.2021.117141
Abstract
An investigation into the recovery and recrystallization of the two major texture fibres, namely α and γ, during annealing yielded subtle differences between the two. It is reported that with thermal activation static recovery occurs, where dislocation free sub-grains are formed and tend to grow, co...
| Published in: | Acta Materialia |
|---|---|
| ISSN: | 1359-6454 |
| Published: |
Elsevier BV
2021
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa57323 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
An investigation into the recovery and recrystallization of the two major texture fibres, namely α and γ, during annealing yielded subtle differences between the two. It is reported that with thermal activation static recovery occurs, where dislocation free sub-grains are formed and tend to grow, coalesce, or bulge out. This can form new strain-free recrystallisation nuclei, with the coalescence or bulging phenomenon depending on stored energy and geometrically dislocation density (GND). Due to low lattice curvature or otherwise, it was found α-fiber has low stored energy and GND values which favours bulging into neighbouring deformed grains as opposed to subgrain coalescence. In contrast, γ-fiber tends to undergo rapid subgrain coalescence due to high lattice curvature, i.e., GND and stored energy. The newly formed grains from both texture fibers were also found to typically differ in size, as γ-fiber has a much higher nucleation rate with rapid subgrain coalescence. Furthermore, it was discovered that Cube texture component though nucleating in higher rates within α-fiber, nucleates in all regions of high dislocation densities but will only survive in regions with low recovery and nucleation rates, typically α-fiber. Moreover, Goss texture component was found to preferentially nucleate from γ-fiber. |
|---|---|
| Item Description: |
https://researchportal.port.ac.uk/portal/en/publications/disparity-in-recrystallization-of---fibers-and-its-impact-on-cube-texture-formation-in-nonoriented-electrical-steel(8849c687-047d-40c3-b74e-b215d2b09b19).html |
| Keywords: |
Recovery, Recrystallization, Texture Evolution, Fibre Texture, Electrical Steel |
| College: |
Faculty of Science and Engineering |
| Start Page: |
117141 |