E-Thesis 446 views 111 downloads
Hydrogen Embrittlement of Automotive Ultra-High-Strength Steels: Mechanism and Minimisation / JAMES LELLIOTT
Swansea University Author: JAMES LELLIOTT
DOI (Published version): 10.23889/SUthesis.62149
Abstract
Automotive manufacturers are increasingly using ultra-high-strength steels in vehicle components to facilitate mass reduction via downgauging. Unfortunately, as the strength of steels increases, so does susceptibility to ‘hydrogen embrittlement’, a process in which ductility is significantly impaire...
| Published: |
Swansea
2022
|
|---|---|
| Institution: | Swansea University |
| Degree level: | Doctoral |
| Degree name: | EngD |
| Supervisor: | Sackett, Elizabeth; Figueroa-Gordon, Douglas |
| URI: | https://cronfa.swan.ac.uk/Record/cronfa62149 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Automotive manufacturers are increasingly using ultra-high-strength steels in vehicle components to facilitate mass reduction via downgauging. Unfortunately, as the strength of steels increases, so does susceptibility to ‘hydrogen embrittlement’, a process in which ductility is significantly impaired by ingress of hydrogen. Mechanisms and environmental conditions by which this degradation occurs are not fully understood. In this work, 2 fully-ferritic, 2 fully-martensitic boron, and 2 ferrite-martensite dual-phase, ultra-high-strength steels, were assessed for susceptibility to hydrogen embrittlement via 3 key characteristics: firstly, with particular regard to hydrogen evolution under corrosion conditions, through well-established open circuit potential and potentiodynamic polarisation experiments. Exacerbation of hydrogen evolution through galvanic corrosion of a zinc coating was assessed by scanning vibrating electrode technique (SVET), and an attempt made to quantify increased risk of hydrogen evolution during crevice corrosion through a novel time-lapse photography experiment. Secondly, hydrogen diffusivity was assessed via permeation experiments. Finally, degradation in mechanical properties due to diffusing hydrogen was evaluated through slow strain rate tests (SSRT), whereby susceptibility to embrittlement was equated to reduction in ductility of hydrogen-charged test specimens. The fully-ferritic steels showed the greatest resistance to mechanical degradation, attributed to micro-alloy nano-precipitates within their microstructure acting as ‘traps’, leading to lower diffusivity compared to dual-phase steels of equivalent strength. Indeed, lower diffusivity showed a strong correlation with lower levels of embrittlement across all steels. 1000 MPa dual-phase steel showed the greatest degradation in mechanical properties, with fully-martensitic boron steels also found to be particularly susceptible. 1000 MPa dual-phase steel also showed the largest increase in hydrogen evolution reaction in response to polarisation, thought to result from the inherent potential difference between ferrite and martensite phases. Galvanic corrosion of a damaged zinc coating was found to polarise the exposed steel substrate, triggering sufficient hydrogen evolution to reach critical concentrations for embrittlement. |
|---|---|
| Item Description: |
ORCiD identifier: https://orcid.org/0000-0002-3036-3326 |
| Keywords: |
Embrittlement, Steel, Hydrogen, SSRT, Permeation, Corrosion |
| College: |
Faculty of Science and Engineering |