Journal article 364 views 60 downloads
Experimental and numerical investigation of an aircraft wing with hinged wingtip for gust load alleviation
Journal of Fluids and Structures, Volume: 119, Start page: 103892
Swansea University Authors:
Davide Balatti, Hamed Haddad Khodaparast , Michael Friswell
-
PDF | Version of Record
Distributed under the terms of a Creative Commons Attribution 4.0 License (CC-BY).
Download (7.66MB)
DOI (Published version): 10.1016/j.jfluidstructs.2023.103892
Abstract
A recent consideration in aircraft design is using hinged wing tip devices to increase the aspect ratio, improving aircraft performance. Moreover, numerical studies have suggested using the wingtips during flight to provide additional gust load alleviation ability. This work aims to experimentally v...
Published in: | Journal of Fluids and Structures |
---|---|
ISSN: | 0889-9746 1095-8622 |
Published: |
Elsevier BV
2023
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa63238 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
A recent consideration in aircraft design is using hinged wing tip devices to increase the aspect ratio, improving aircraft performance. Moreover, numerical studies have suggested using the wingtips during flight to provide additional gust load alleviation ability. This work aims to experimentally validate aeroelastic models of a wing with fixed and hinged wingtips. Validated numerical models of wings with hinged wingtips are essential to improve predictions and system knowledge and as a reference model for design optimisation. An elastic wing with hinged and fixed wingtips with different weights was tested. Static wind tunnel tests confirmed the ability of hinged wingtips to reduce gust loads. Aeroelastic models of the wing with the manufactured wingtips were developed, and time history gust responses validated the models. The validated models drove the design of a more efficient wingtip, which experimentally proved the improvement of load alleviation by reducing its mass and structural inertia. Based on this, a parametric study highlighted that increasing the wingtip mass alone, reducing the spanwise distance of the wingtip centre of mass from the hinge, or reducing the hinge stiffness reduces the maximum wing root bending moment. |
---|---|
Keywords: |
Gust load alleviation, Wind tunnel testing, Hinged wingtips, Model validation |
College: |
Faculty of Science and Engineering |
Funders: |
EPSRC (EP/R006768/1) |
Start Page: |
103892 |