E-Thesis 151 views 49 downloads
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments / JOSHUA AGBESEYI
Swansea University Author: JOSHUA AGBESEYI
Abstract
This thesis has been produced as a result of academic (Swansea University) and Industrial (Langley Alloys Ltd.) collaboration, facilitated through Swansea University’s M2A organisation under the Masters by Research (MSc) scheme of study. The scope of this investigation was set in the hopes of contri...
| Published: |
Swansea, Wales, UK
2023
|
|---|---|
| Institution: | Swansea University |
| Degree level: | Master of Research |
| Degree name: | MSc by Research |
| Supervisor: | Williams, Geraint. and Wint, Natalie. |
| URI: | https://cronfa.swan.ac.uk/Record/cronfa63723 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| first_indexed |
2023-06-27T13:03:31Z |
|---|---|
| last_indexed |
2023-06-27T13:03:31Z |
| id |
cronfa63723 |
| recordtype |
RisThesis |
| fullrecord |
<?xml version="1.0" encoding="utf-8"?><rfc1807 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><bib-version>v2</bib-version><id>63723</id><entry>2023-06-27</entry><title>Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments</title><swanseaauthors><author><sid>4439e70d2f038772744785e908eab851</sid><firstname>JOSHUA</firstname><surname>AGBESEYI</surname><name>JOSHUA AGBESEYI</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2023-06-27</date><abstract>This thesis has been produced as a result of academic (Swansea University) and Industrial (Langley Alloys Ltd.) collaboration, facilitated through Swansea University’s M2A organisation under the Masters by Research (MSc) scheme of study. The scope of this investigation was set in the hopes of contributing to the current collective understanding and literature surrounding the localised electrochemical breakdown activity in Super Duplex Stainless Steels (SDSS). With specific consideration being given to highlighting the influence of Copper and Tungsten alloying additions on SDSS’s observed passivation and breakdown tendencies, when immersed and anodically polarised in a range of acidic & alkaline chloride media. This would, ideally, give an idea into how said additions impact and dictate the consequential states of nobility in the dual-phasic microstructure and bulk-alloy. In pursuit of these aims, it was the scope of this study to electrochemically investigate 3 different high Cr-content (25wt%) SDSS alloys of identical composition (excluding Cu- and W wt%) in various chloride-containing aqueous media. Consequently this would help ascertain their strengths/weaknesses in given conditions, with specific consideration to their addition-differences which would then be attributed to observed differences corrosion features with specific element additions. The alloys investigated in this study were UNS-S3550 (Ferralium® 255) UNS-S3750 (SAF 2507) and UNS-S3760 (Zeron®100). Under external anodic-polarisation these alloys were tested in various deoxygenated electrolyte solutions of 0.6M NaCl(aq) at a maintained ambient temperature of 25°C, in both alkaline and acidic conditions ranging from pH 3 to 11. Adjustment of pH was achieved via drop-wise addition of NaOH and HCl. PP and SVET analysis was employed to help quantify, map and explain the bulk & localised ionic-transport behaviour (respectively), both under open-circuit and non-polarised conditions. Findings from bulk anodic current characterisation using potentiodynamic polarisation were in good agreeance with observations made in a previous iteration of this study. That is to say it was found that in these conditions, anodic current increases typically associated with the phenomena of passive layer (PL) breakdown were mainly a result of transpassive dissolution kinetics, spotted with instances of localised pitting. Post-corrosion microscopy showed the anodic dissolution to unfold as a surface-wide, selective etching of constituent phases, typically attacking the less noble ferrite phase. This was later further supplemented with localised in-situ SVET scanning, showing the corrosive damage to evolve as an anodic “front”, steadily progressing across the active region of the corroding surface until stoppage of polarisation. Hysteresis loop data from potentiodynamic polarisation (PP) sweeps demonstrated a clear benefit of Cu-additions in mitigation of pitting damage in both acidic and alkaline chloride media. W-additions were also found to be beneficial for suppression of corrosion damage when compared to non-Cu/W containing grades (UNS-S3750).</abstract><type>E-Thesis</type><journal/><volume/><journalNumber/><paginationStart/><paginationEnd/><publisher/><placeOfPublication>Swansea, Wales, UK</placeOfPublication><isbnPrint/><isbnElectronic/><issnPrint/><issnElectronic/><keywords>Corrosion, Super Duplex Stainless Steel, Tungsten, Copper, Chloride, SVET, Potentiodynamic Polarisation</keywords><publishedDay>23</publishedDay><publishedMonth>2</publishedMonth><publishedYear>2023</publishedYear><publishedDate>2023-02-23</publishedDate><doi/><url/><notes/><college>COLLEGE NANME</college><CollegeCode>COLLEGE CODE</CollegeCode><institution>Swansea University</institution><supervisor>Williams, Geraint. and Wint, Natalie.</supervisor><degreelevel>Master of Research</degreelevel><degreename>MSc by Research</degreename><degreesponsorsfunders>M2A, Langley Alloys (UK)</degreesponsorsfunders><apcterm/><funders/><projectreference/><lastEdited>2023-06-27T14:05:23.2638942</lastEdited><Created>2023-06-27T13:58:49.1542568</Created><path><level id="1">Faculty of Science and Engineering</level><level id="2">School of Engineering and Applied Sciences - Materials Science and Engineering</level></path><authors><author><firstname>JOSHUA</firstname><surname>AGBESEYI</surname><order>1</order></author></authors><documents><document><filename>63723__27988__26348a4baf814123bae6ebdaf664a2b0.pdf</filename><originalFilename>2023_Agbeseyi_J.final.63723.pdf</originalFilename><uploaded>2023-06-27T14:03:50.3870645</uploaded><type>Output</type><contentLength>4132014</contentLength><contentType>application/pdf</contentType><version>E-Thesis – open access</version><cronfaStatus>true</cronfaStatus><documentNotes>Copyright: The Author, Joshua Agbeseyi, 2023.</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language></document></documents><OutputDurs/></rfc1807> |
| spelling |
v2 63723 2023-06-27 Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments 4439e70d2f038772744785e908eab851 JOSHUA AGBESEYI JOSHUA AGBESEYI true false 2023-06-27 This thesis has been produced as a result of academic (Swansea University) and Industrial (Langley Alloys Ltd.) collaboration, facilitated through Swansea University’s M2A organisation under the Masters by Research (MSc) scheme of study. The scope of this investigation was set in the hopes of contributing to the current collective understanding and literature surrounding the localised electrochemical breakdown activity in Super Duplex Stainless Steels (SDSS). With specific consideration being given to highlighting the influence of Copper and Tungsten alloying additions on SDSS’s observed passivation and breakdown tendencies, when immersed and anodically polarised in a range of acidic & alkaline chloride media. This would, ideally, give an idea into how said additions impact and dictate the consequential states of nobility in the dual-phasic microstructure and bulk-alloy. In pursuit of these aims, it was the scope of this study to electrochemically investigate 3 different high Cr-content (25wt%) SDSS alloys of identical composition (excluding Cu- and W wt%) in various chloride-containing aqueous media. Consequently this would help ascertain their strengths/weaknesses in given conditions, with specific consideration to their addition-differences which would then be attributed to observed differences corrosion features with specific element additions. The alloys investigated in this study were UNS-S3550 (Ferralium® 255) UNS-S3750 (SAF 2507) and UNS-S3760 (Zeron®100). Under external anodic-polarisation these alloys were tested in various deoxygenated electrolyte solutions of 0.6M NaCl(aq) at a maintained ambient temperature of 25°C, in both alkaline and acidic conditions ranging from pH 3 to 11. Adjustment of pH was achieved via drop-wise addition of NaOH and HCl. PP and SVET analysis was employed to help quantify, map and explain the bulk & localised ionic-transport behaviour (respectively), both under open-circuit and non-polarised conditions. Findings from bulk anodic current characterisation using potentiodynamic polarisation were in good agreeance with observations made in a previous iteration of this study. That is to say it was found that in these conditions, anodic current increases typically associated with the phenomena of passive layer (PL) breakdown were mainly a result of transpassive dissolution kinetics, spotted with instances of localised pitting. Post-corrosion microscopy showed the anodic dissolution to unfold as a surface-wide, selective etching of constituent phases, typically attacking the less noble ferrite phase. This was later further supplemented with localised in-situ SVET scanning, showing the corrosive damage to evolve as an anodic “front”, steadily progressing across the active region of the corroding surface until stoppage of polarisation. Hysteresis loop data from potentiodynamic polarisation (PP) sweeps demonstrated a clear benefit of Cu-additions in mitigation of pitting damage in both acidic and alkaline chloride media. W-additions were also found to be beneficial for suppression of corrosion damage when compared to non-Cu/W containing grades (UNS-S3750). E-Thesis Swansea, Wales, UK Corrosion, Super Duplex Stainless Steel, Tungsten, Copper, Chloride, SVET, Potentiodynamic Polarisation 23 2 2023 2023-02-23 COLLEGE NANME COLLEGE CODE Swansea University Williams, Geraint. and Wint, Natalie. Master of Research MSc by Research M2A, Langley Alloys (UK) 2023-06-27T14:05:23.2638942 2023-06-27T13:58:49.1542568 Faculty of Science and Engineering School of Engineering and Applied Sciences - Materials Science and Engineering JOSHUA AGBESEYI 1 63723__27988__26348a4baf814123bae6ebdaf664a2b0.pdf 2023_Agbeseyi_J.final.63723.pdf 2023-06-27T14:03:50.3870645 Output 4132014 application/pdf E-Thesis – open access true Copyright: The Author, Joshua Agbeseyi, 2023. true eng |
| title |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| spellingShingle |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments JOSHUA AGBESEYI |
| title_short |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| title_full |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| title_fullStr |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| title_full_unstemmed |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| title_sort |
Influence of Copper (Cu) and Tungsten (W) additions on the passivity and breakdown of Super Duplex Stainless Steels in chloride-containing environments |
| author_id_str_mv |
4439e70d2f038772744785e908eab851 |
| author_id_fullname_str_mv |
4439e70d2f038772744785e908eab851_***_JOSHUA AGBESEYI |
| author |
JOSHUA AGBESEYI |
| author2 |
JOSHUA AGBESEYI |
| format |
E-Thesis |
| publishDate |
2023 |
| institution |
Swansea University |
| college_str |
Faculty of Science and Engineering |
| hierarchytype |
|
| hierarchy_top_id |
facultyofscienceandengineering |
| hierarchy_top_title |
Faculty of Science and Engineering |
| hierarchy_parent_id |
facultyofscienceandengineering |
| hierarchy_parent_title |
Faculty of Science and Engineering |
| department_str |
School of Engineering and Applied Sciences - Materials Science and Engineering{{{_:::_}}}Faculty of Science and Engineering{{{_:::_}}}School of Engineering and Applied Sciences - Materials Science and Engineering |
| document_store_str |
1 |
| active_str |
0 |
| description |
This thesis has been produced as a result of academic (Swansea University) and Industrial (Langley Alloys Ltd.) collaboration, facilitated through Swansea University’s M2A organisation under the Masters by Research (MSc) scheme of study. The scope of this investigation was set in the hopes of contributing to the current collective understanding and literature surrounding the localised electrochemical breakdown activity in Super Duplex Stainless Steels (SDSS). With specific consideration being given to highlighting the influence of Copper and Tungsten alloying additions on SDSS’s observed passivation and breakdown tendencies, when immersed and anodically polarised in a range of acidic & alkaline chloride media. This would, ideally, give an idea into how said additions impact and dictate the consequential states of nobility in the dual-phasic microstructure and bulk-alloy. In pursuit of these aims, it was the scope of this study to electrochemically investigate 3 different high Cr-content (25wt%) SDSS alloys of identical composition (excluding Cu- and W wt%) in various chloride-containing aqueous media. Consequently this would help ascertain their strengths/weaknesses in given conditions, with specific consideration to their addition-differences which would then be attributed to observed differences corrosion features with specific element additions. The alloys investigated in this study were UNS-S3550 (Ferralium® 255) UNS-S3750 (SAF 2507) and UNS-S3760 (Zeron®100). Under external anodic-polarisation these alloys were tested in various deoxygenated electrolyte solutions of 0.6M NaCl(aq) at a maintained ambient temperature of 25°C, in both alkaline and acidic conditions ranging from pH 3 to 11. Adjustment of pH was achieved via drop-wise addition of NaOH and HCl. PP and SVET analysis was employed to help quantify, map and explain the bulk & localised ionic-transport behaviour (respectively), both under open-circuit and non-polarised conditions. Findings from bulk anodic current characterisation using potentiodynamic polarisation were in good agreeance with observations made in a previous iteration of this study. That is to say it was found that in these conditions, anodic current increases typically associated with the phenomena of passive layer (PL) breakdown were mainly a result of transpassive dissolution kinetics, spotted with instances of localised pitting. Post-corrosion microscopy showed the anodic dissolution to unfold as a surface-wide, selective etching of constituent phases, typically attacking the less noble ferrite phase. This was later further supplemented with localised in-situ SVET scanning, showing the corrosive damage to evolve as an anodic “front”, steadily progressing across the active region of the corroding surface until stoppage of polarisation. Hysteresis loop data from potentiodynamic polarisation (PP) sweeps demonstrated a clear benefit of Cu-additions in mitigation of pitting damage in both acidic and alkaline chloride media. W-additions were also found to be beneficial for suppression of corrosion damage when compared to non-Cu/W containing grades (UNS-S3750). |
| published_date |
2023-02-23T14:05:19Z |
| _version_ |
1769861146870808576 |
| score |
11.012678 |