Journal article 338 views 50 downloads
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping
Applied Mathematical Modelling, Volume: 124, Pages: 713 - 733
Swansea University Authors:
Lintao Zhang, Will Harrison , Talal Abdullah, Shahin Mehraban, Nicholas Lavery
-
PDF | Version of Record
2023 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license.
Download (8.16MB)
DOI (Published version): 10.1016/j.apm.2023.08.022
Abstract
This study aims to investigate the feasibility of using non-standard miniaturized tensile specimens (MTS) to characterize the formability features of interstitial-free (IF) steel, specifically DX57 steel. The motivation behind this research is to gain insight into the accuracy of predicted values fo...
Published in: | Applied Mathematical Modelling |
---|---|
ISSN: | 0307-904X |
Published: |
Elsevier BV
2023
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa64105 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
first_indexed |
2023-08-22T15:23:15Z |
---|---|
last_indexed |
2023-08-22T15:23:15Z |
id |
cronfa64105 |
recordtype |
SURis |
fullrecord |
<?xml version="1.0" encoding="utf-8"?><rfc1807 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><bib-version>v2</bib-version><id>64105</id><entry>2023-08-22</entry><title>Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping</title><swanseaauthors><author><sid>2e060f2328383b15f607194b4dc0abef</sid><firstname>Lintao</firstname><surname>Zhang</surname><name>Lintao Zhang</name><active>true</active><ethesisStudent>false</ethesisStudent></author><author><sid>dae59f76fa4f63123aa028abfcd2b07a</sid><ORCID>0000-0002-0380-7075</ORCID><firstname>Will</firstname><surname>Harrison</surname><name>Will Harrison</name><active>true</active><ethesisStudent>false</ethesisStudent></author><author><sid>dbecbe6a4a0d98dad2caeda9e617b66b</sid><firstname>Talal</firstname><surname>Abdullah</surname><name>Talal Abdullah</name><active>true</active><ethesisStudent>false</ethesisStudent></author><author><sid>c7e4a4152b2cf403da129be7d1c2904d</sid><ORCID/><firstname>Shahin</firstname><surname>Mehraban</surname><name>Shahin Mehraban</name><active>true</active><ethesisStudent>false</ethesisStudent></author><author><sid>9f102ff59824fd4f7ce3d40144304395</sid><ORCID>0000-0003-0953-5936</ORCID><firstname>Nicholas</firstname><surname>Lavery</surname><name>Nicholas Lavery</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2023-08-22</date><deptcode>GWCO</deptcode><abstract>This study aims to investigate the feasibility of using non-standard miniaturized tensile specimens (MTS) to characterize the formability features of interstitial-free (IF) steel, specifically DX57 steel. The motivation behind this research is to gain insight into the accuracy of predicted values for the steel's formability using the designed non-standard MTS, which could potentially be used to test materials obtained from rapid alloy prototyping (RAP) routines. Tensile tests were conducted using both standard bars and non-standard MTS with different angles to the rolling directions (0°, 45°, and 90°) and the experiment results were used to determine the material properties for the following numerical simulations, which were based on the cross-die deep drawing concept. The results show that the non-standard MTS over-predicted the strain hardening exponent compared to the values obtained from the standard tensile bars. For the same punch stroke, the non-standard miniatured tensile specimen under-predicted the punch force. However, for the deformed blank, the thickness variation along different paths was compared, and the maximum thickness value difference was found to be less than 5%. In terms of the forming limit diagram (FLD), the MTS's prediction is very close to the standard test-piece's prediction; the overall major-minor strain status of the deformed blank is similar. The results of this research provide confidence in the ability to evaluate formability from small-scale tensile tests for heterogeneous alloys such as synthetic IF steels developed during RAP.</abstract><type>Journal Article</type><journal>Applied Mathematical Modelling</journal><volume>124</volume><journalNumber/><paginationStart>713</paginationStart><paginationEnd>733</paginationEnd><publisher>Elsevier BV</publisher><placeOfPublication/><isbnPrint/><isbnElectronic/><issnPrint>0307-904X</issnPrint><issnElectronic/><keywords>Steel development, Rapid alloy prototyping, Cross-die deep drawing, Interstitial-free steel, Forming limit diagram</keywords><publishedDay>1</publishedDay><publishedMonth>12</publishedMonth><publishedYear>2023</publishedYear><publishedDate>2023-12-01</publishedDate><doi>10.1016/j.apm.2023.08.022</doi><url/><notes/><college>COLLEGE NANME</college><department>Gower College</department><CollegeCode>COLLEGE CODE</CollegeCode><DepartmentCode>GWCO</DepartmentCode><institution>Swansea University</institution><apcterm>SU Library paid the OA fee (TA Institutional Deal)</apcterm><funders>The authors would like to thank EPSRC for funding the Rapid Alloy Prototyping Prosperity Partnership project (EP/S005218/1 - ACCELERATING ALLOY DEVELOPMENT THROUGH DELIVERING NOVEL PROTOTYPING SOLUTIONS) which made this work possible. The authors would also like to thank the Welsh Government, European Regional Development Fund (ERDF) and SMART Expertise Wales for funding Materials Advanced Characterisation Centre (MACH1) where the work was carried out.</funders><projectreference/><lastEdited>2024-05-08T13:30:17.7379263</lastEdited><Created>2023-08-22T16:17:58.1773706</Created><path><level id="1">Faculty of Science and Engineering</level><level id="2">School of Aerospace, Civil, Electrical, General and Mechanical Engineering - Mechanical Engineering</level></path><authors><author><firstname>Lintao</firstname><surname>Zhang</surname><order>1</order></author><author><firstname>Will</firstname><surname>Harrison</surname><orcid>0000-0002-0380-7075</orcid><order>2</order></author><author><firstname>Talal</firstname><surname>Abdullah</surname><order>3</order></author><author><firstname>Shahin</firstname><surname>Mehraban</surname><orcid/><order>4</order></author><author><firstname>Nicholas</firstname><surname>Lavery</surname><orcid>0000-0003-0953-5936</orcid><order>5</order></author></authors><documents><document><filename>64105__28457__f7b76a19fea54a428f0d55b645d8f194.pdf</filename><originalFilename>64105 VOR.pdf</originalFilename><uploaded>2023-09-05T15:39:44.8974188</uploaded><type>Output</type><contentLength>8554443</contentLength><contentType>application/pdf</contentType><version>Version of Record</version><cronfaStatus>true</cronfaStatus><documentNotes>2023 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license.</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language><licence>http://creativecommons.org/licenses/by/4.0/</licence></document></documents><OutputDurs/></rfc1807> |
spelling |
v2 64105 2023-08-22 Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping 2e060f2328383b15f607194b4dc0abef Lintao Zhang Lintao Zhang true false dae59f76fa4f63123aa028abfcd2b07a 0000-0002-0380-7075 Will Harrison Will Harrison true false dbecbe6a4a0d98dad2caeda9e617b66b Talal Abdullah Talal Abdullah true false c7e4a4152b2cf403da129be7d1c2904d Shahin Mehraban Shahin Mehraban true false 9f102ff59824fd4f7ce3d40144304395 0000-0003-0953-5936 Nicholas Lavery Nicholas Lavery true false 2023-08-22 GWCO This study aims to investigate the feasibility of using non-standard miniaturized tensile specimens (MTS) to characterize the formability features of interstitial-free (IF) steel, specifically DX57 steel. The motivation behind this research is to gain insight into the accuracy of predicted values for the steel's formability using the designed non-standard MTS, which could potentially be used to test materials obtained from rapid alloy prototyping (RAP) routines. Tensile tests were conducted using both standard bars and non-standard MTS with different angles to the rolling directions (0°, 45°, and 90°) and the experiment results were used to determine the material properties for the following numerical simulations, which were based on the cross-die deep drawing concept. The results show that the non-standard MTS over-predicted the strain hardening exponent compared to the values obtained from the standard tensile bars. For the same punch stroke, the non-standard miniatured tensile specimen under-predicted the punch force. However, for the deformed blank, the thickness variation along different paths was compared, and the maximum thickness value difference was found to be less than 5%. In terms of the forming limit diagram (FLD), the MTS's prediction is very close to the standard test-piece's prediction; the overall major-minor strain status of the deformed blank is similar. The results of this research provide confidence in the ability to evaluate formability from small-scale tensile tests for heterogeneous alloys such as synthetic IF steels developed during RAP. Journal Article Applied Mathematical Modelling 124 713 733 Elsevier BV 0307-904X Steel development, Rapid alloy prototyping, Cross-die deep drawing, Interstitial-free steel, Forming limit diagram 1 12 2023 2023-12-01 10.1016/j.apm.2023.08.022 COLLEGE NANME Gower College COLLEGE CODE GWCO Swansea University SU Library paid the OA fee (TA Institutional Deal) The authors would like to thank EPSRC for funding the Rapid Alloy Prototyping Prosperity Partnership project (EP/S005218/1 - ACCELERATING ALLOY DEVELOPMENT THROUGH DELIVERING NOVEL PROTOTYPING SOLUTIONS) which made this work possible. The authors would also like to thank the Welsh Government, European Regional Development Fund (ERDF) and SMART Expertise Wales for funding Materials Advanced Characterisation Centre (MACH1) where the work was carried out. 2024-05-08T13:30:17.7379263 2023-08-22T16:17:58.1773706 Faculty of Science and Engineering School of Aerospace, Civil, Electrical, General and Mechanical Engineering - Mechanical Engineering Lintao Zhang 1 Will Harrison 0000-0002-0380-7075 2 Talal Abdullah 3 Shahin Mehraban 4 Nicholas Lavery 0000-0003-0953-5936 5 64105__28457__f7b76a19fea54a428f0d55b645d8f194.pdf 64105 VOR.pdf 2023-09-05T15:39:44.8974188 Output 8554443 application/pdf Version of Record true 2023 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license. true eng http://creativecommons.org/licenses/by/4.0/ |
title |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
spellingShingle |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping Lintao Zhang Will Harrison Talal Abdullah Shahin Mehraban Nicholas Lavery |
title_short |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
title_full |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
title_fullStr |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
title_full_unstemmed |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
title_sort |
Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping |
author_id_str_mv |
2e060f2328383b15f607194b4dc0abef dae59f76fa4f63123aa028abfcd2b07a dbecbe6a4a0d98dad2caeda9e617b66b c7e4a4152b2cf403da129be7d1c2904d 9f102ff59824fd4f7ce3d40144304395 |
author_id_fullname_str_mv |
2e060f2328383b15f607194b4dc0abef_***_Lintao Zhang dae59f76fa4f63123aa028abfcd2b07a_***_Will Harrison dbecbe6a4a0d98dad2caeda9e617b66b_***_Talal Abdullah c7e4a4152b2cf403da129be7d1c2904d_***_Shahin Mehraban 9f102ff59824fd4f7ce3d40144304395_***_Nicholas Lavery |
author |
Lintao Zhang Will Harrison Talal Abdullah Shahin Mehraban Nicholas Lavery |
author2 |
Lintao Zhang Will Harrison Talal Abdullah Shahin Mehraban Nicholas Lavery |
format |
Journal article |
container_title |
Applied Mathematical Modelling |
container_volume |
124 |
container_start_page |
713 |
publishDate |
2023 |
institution |
Swansea University |
issn |
0307-904X |
doi_str_mv |
10.1016/j.apm.2023.08.022 |
publisher |
Elsevier BV |
college_str |
Faculty of Science and Engineering |
hierarchytype |
|
hierarchy_top_id |
facultyofscienceandengineering |
hierarchy_top_title |
Faculty of Science and Engineering |
hierarchy_parent_id |
facultyofscienceandengineering |
hierarchy_parent_title |
Faculty of Science and Engineering |
department_str |
School of Aerospace, Civil, Electrical, General and Mechanical Engineering - Mechanical Engineering{{{_:::_}}}Faculty of Science and Engineering{{{_:::_}}}School of Aerospace, Civil, Electrical, General and Mechanical Engineering - Mechanical Engineering |
document_store_str |
1 |
active_str |
0 |
description |
This study aims to investigate the feasibility of using non-standard miniaturized tensile specimens (MTS) to characterize the formability features of interstitial-free (IF) steel, specifically DX57 steel. The motivation behind this research is to gain insight into the accuracy of predicted values for the steel's formability using the designed non-standard MTS, which could potentially be used to test materials obtained from rapid alloy prototyping (RAP) routines. Tensile tests were conducted using both standard bars and non-standard MTS with different angles to the rolling directions (0°, 45°, and 90°) and the experiment results were used to determine the material properties for the following numerical simulations, which were based on the cross-die deep drawing concept. The results show that the non-standard MTS over-predicted the strain hardening exponent compared to the values obtained from the standard tensile bars. For the same punch stroke, the non-standard miniatured tensile specimen under-predicted the punch force. However, for the deformed blank, the thickness variation along different paths was compared, and the maximum thickness value difference was found to be less than 5%. In terms of the forming limit diagram (FLD), the MTS's prediction is very close to the standard test-piece's prediction; the overall major-minor strain status of the deformed blank is similar. The results of this research provide confidence in the ability to evaluate formability from small-scale tensile tests for heterogeneous alloys such as synthetic IF steels developed during RAP. |
published_date |
2023-12-01T13:30:16Z |
_version_ |
1798487583346393088 |
score |
11.021648 |