Journal article 272 views 45 downloads
Comparing Ultralong Carbon Nanotube Growth from Methane over Mono- and Bi-Metallic Iron Chloride Catalysts
,
Alvin Orbaek White
Nanomaterials, Volume: 13, Issue: 15, Start page: 2172
Swansea University Authors:
Tim Yick, Varun Gangoli , Alvin Orbaek White
-
PDF | Version of Record
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
Download (4.86MB)
DOI (Published version): 10.3390/nano13152172
Abstract
This research endeavours to study the growth of ultralong carbon nanotubes (UL-CNTs) from methane using diverse catalysts, namely FeCl3, bi-metallic Fe-Cu, Fe-Ni, and Fe-Co chlorides. Aqueous catalyst solutions were evenly dispersed on silica substrates and grown at 950 °C in the presence of hydroge...
| Published in: | Nanomaterials |
|---|---|
| ISSN: | 2079-4991 |
| Published: |
MDPI AG
2023
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa64117 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
This research endeavours to study the growth of ultralong carbon nanotubes (UL-CNTs) from methane using diverse catalysts, namely FeCl3, bi-metallic Fe-Cu, Fe-Ni, and Fe-Co chlorides. Aqueous catalyst solutions were evenly dispersed on silica substrates and grown at 950 °C in the presence of hydrogen via a horizontal chemical vapour deposition (CVD) furnace. The samples underwent characterisation by Raman spectroscopy, scanning electron microscopy (SEM), and optical microscopy to identify the quality of CNTs and enumerate individual UL-CNTs. Our findings revealed that FeCl3, as a mono-metallic catalyst, generated the longest UL-CNTs, which measured 1.32 cm, followed by Fe-Cu (0.85 cm), Fe-Co (0.7 cm), and Fe-Ni (0.6 cm), respectively. The G/D ratio (graphene to defects) from the Raman spectroscopy was the highest with the FeCl3 catalyst (3.09), followed by Fe-Cu (2.79), Fe-Co catalyst (2.13), and Fe-Ni (2.52). It indicates that the mono-iron-based catalyst also produces the highest purity CNTs. Moreover, this study scrutinises the vapour-liquid-solid (VLS) model for CNT growth and the impact of carbide formation as a precursor to CNT growth. Our research findings indicate that forming iron carbide (Fe3C) is a crucial transition phase for amorphous carbon transformation to CNTs. Notably, the iron catalyst generated the longest and densest CNTs relative to other iron-based bi-metallic catalysts, which is consistent with the temperature of carbide formation in the mono-metallic system. From correlations made using the phase diagram with carbon, we conclude that CNT growth is favoured because of increased carbon solubility within the mono-metallic catalyst compared to the bi-metallic catalysts. |
|---|---|
| Keywords: |
carbon nanotube; ultralong carbon nanotube; iron chloride; vapour-liquid-solid |
| College: |
Faculty of Science and Engineering |
| Funders: |
A.O.W. was funded through the Sêr Cymru II Fellowship by the Welsh Government and the European Regional Development Fund (ERDF). A.O.W. and T.Y. acknowledge funding from the Welsh Government Circular Economy Capital Fund for FY 2020–21. V.S.G. is funded thanks to Salts Healthcare Ltd. and TRIMTABS Ltd. The authors acknowledge access to the SEM provided by the Swansea University AIM Facility, funded partly by the EPSRC (EP/M028267/1), the European Regional Development Fund through the Welsh Government (80708), and the Welsh Government’s Sêr Cymru program. |
| Issue: |
15 |
| Start Page: |
2172 |