Journal article 235 views 47 downloads
IAC-22-C3.3.8 Six years of spaceflight results from the AlSat-1N Thin-Film Solar Cell (TFSC) experiment
Acta Astronautica, Volume: 213, Pages: 20 - 28
Swansea University Author:
Dan Lamb
-
PDF | Version of Record
© 2023 The Authors. Published by Elsevier Ltd on behalf of IAA. Distributed under the terms of a Creative Commons Attribution 4.0 License (CC BY 4.0).
Download (5.43MB)
DOI (Published version): 10.1016/j.actaastro.2023.08.034
Abstract
The increasing power demands of spacecraft payloads and the realistic prospect of space based solar power (SBSP) stations as a means of providing zero carbon electricity in the 2030s, means that there is an emerging requirement for large area, yet lightweight, solar photovoltaic (PV) arrays that wil...
Published in: | Acta Astronautica |
---|---|
ISSN: | 0094-5765 |
Published: |
Elsevier BV
2023
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa64164 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
The increasing power demands of spacecraft payloads and the realistic prospect of space based solar power (SBSP) stations as a means of providing zero carbon electricity in the 2030s, means that there is an emerging requirement for large area, yet lightweight, solar photovoltaic (PV) arrays that will provide far greater power (kWpeak) than is currently available. To be practical, such arrays will need to use solar cells which have a much higher specific power (i.e., power per unit mass) and a much lower cost per watt than current space-rated solar PV technologies. To this end, the Centre for Solar Energy Research (CSER) at Swansea University have been working on a new solar cell technology, based on thin-film cadmium telluride (CdTe), deposited directly onto ultra-thin space qualified cover glass material. This offers a potentially high specific power and when adopting the conventional CdTe manufacturing process, a low-cost technology. The ultra-thin glass can produce a solar cell which is sufficiently flexible to allow “roll-out” deployment strategies. Four prototype cells were flown as part of the Thin-Film Solar Cell (TFSC) experimental payload, developed by CSER and the Surrey Space Centre (SSC), on the joint Algerian Space Agency (ASAL) – UK Space Agency AlSAT-1N Technology Demonstration CubeSat, launched into a 661 km × 700 km, 98.20° Sun Synchronous orbit, on September 26, 2016. The experiment has provided the first in-orbit current/voltage (I/V) measurements of this novel technology, and more than five years of flight results have now yielded new insights into its longer-term performance and inherent radiation hardness, which makes them particularly attractive for maintaining high end-of-life (EOL) performance for long duration space missions. The results help to strengthen the argument for further development of this technology for space application. The data, collected over ∼30,000 orbits, show no signs of cell delamination (a potential risk for such technologies), no deterioration in short circuit current or in series resistance. However, all four cell's fill factors were observed to decrease over the duration of the mission, caused primarily by a decrease in their shunt resistance. This has been attributed to the diffusion of gold atoms from the back electrical contacts. We conclude therefore that further development of this technology should utilize more stable back contacting methodologies more commonly employed for terrestrial CdTe modules. However, this flight has proven the basic soundness of the technology for use in space. |
---|---|
Keywords: |
Thin-film solar cells, CubeSat, Technology demonstration |
College: |
Faculty of Science and Engineering |
Funders: |
EPSRC |
Start Page: |
20 |
End Page: |
28 |