Journal article 49 views 4 downloads
Pallet Stamping Die Design
,
Xiaokui Xu,
Shaoxiang Li
Journal of Physics: Conference Series, Volume: 2402, Issue: 1, Start page: 012015
Swansea University Author:
Chunxu Li
-
PDF | Version of Record
Released under the terms of the Creative Commons Attribution 3.0 licence.
Download (617.7KB)
DOI (Published version): 10.1088/1742-6596/2402/1/012015
Abstract
Nowadays, the level of stamping dies in the world has been greatly improved, and stamping technology has also developed greatly. Based on the analysis of the pallet parts, it is determined that the required processes are punching and blanking. The compound dying for punching and blanking was chosen...
| Published in: | Journal of Physics: Conference Series |
|---|---|
| ISSN: | 1742-6588 1742-6596 |
| Published: |
IOP Publishing
2022
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa65994 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Nowadays, the level of stamping dies in the world has been greatly improved, and stamping technology has also developed greatly. Based on the analysis of the pallet parts, it is determined that the required processes are punching and blanking. The compound dying for punching and blanking was chosen for processing after the processing method was examined. Specific design process: analyze the material used for the part, calculate the required punching force, and select the required press according to the punching force, the closing height of the die, and the size of the die handle hole. The parts required by the die, such as convex and concave die, stripper plate, fixed plate, and other components, should also be designed so that the processing of the parts can be completed after the assembly is completed. In the design process, CAD drawing software, three-dimensional drawing software, etc., can be used to complete the drawing of two-dimensional and three-dimensional drawings of parts, improve the efficiency of our drawing, and can also quickly solve problems existing in the drawing, which makes the design process simpler. |
|---|---|
| College: |
Faculty of Science and Engineering |
| Issue: |
1 |
| Start Page: |
012015 |