Journal article 1442 views 196 downloads
Investigation of the growth parameters of hydrothermal ZnO nanowires for scale up applications
Journal of Saudi Chemical Society
Swansea University Authors:
Cameron Pleydell-Pearce, Thierry Maffeis
-
PDF | Accepted Manuscript
Download (4.67MB)
DOI (Published version): 10.1016/j.jscs.2017.09.004
Abstract
Zinc oxide nano-wires (ZnO NWs) are synthesized reproducibly with high yield via a low temperature hydrothermal technique. The influence of the growth duration time, growth temperature, zinc precursor and base concentration of Na2CO3 on the morphology of NWs is investigated. The growth products are...
Published in: | Journal of Saudi Chemical Society |
---|---|
ISSN: | 1319-6103 |
Published: |
2017
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa35717 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
Zinc oxide nano-wires (ZnO NWs) are synthesized reproducibly with high yield via a low temperature hydrothermal technique. The influence of the growth duration time, growth temperature, zinc precursor and base concentration of Na2CO3 on the morphology of NWs is investigated. The growth products are characterised using scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). SEM analysis shows that the optimum growth temperature is 140 °C and finds that length and diameter of ZnO NWs have a relationship with growth duration time and base concentrations of Na2CO3. In addition, it is reported that a high (∼ 90%) yield of ZnO NWs can be synthesised via using any of three different precursors: zinc chloride, zinc acetate and zinc nitrate. TEM and XRD results indicate the high purity and the single crystalline nature of the ZnO NWs. XPS confirms the absence of sodium contaminants on the surface and indicates a near flat band surface condition. PL shows a large visible band in the yellow part of the spectrum, and a small exciton emission peak, indicating a large defect concentration, which is reduced after annealing in air. |
---|---|
Keywords: |
Semiconducting materials; Nanomaterials; Hydrothermal crystal growth; Characterization; X-ray diffraction; Defects |
College: |
Faculty of Science and Engineering |