Journal article 947 views
The effect of electrode calendering on the performance of fully printed Zn∣MnO2 batteries
Flexible and Printed Electronics, Volume: 4, Issue: 3, Start page: 035003
Swansea University Author:
Tim Claypole
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1088/2058-8585/ab38e2
Abstract
Primary zinc–carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes re...
Published in: | Flexible and Printed Electronics |
---|---|
ISSN: | 2058-8585 |
Published: |
2019
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa51736 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
Primary zinc–carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes resulted in electrode layer thickness reduction on both sides, modified micropore surface area and volume on the cathode side. Galvanostatic impedance measurements and chronopotentiometry were used to characterise fabricated batteries with the individually prepared electrode configurations. While calendering of both electrodes of the batteries showed adverse effects by an increase of internal resistances and a reduction of discharge capacities, exclusive calendering of the zinc anode increased the active material utilisation by electrochemical cell reaction and thus the discharge efficiency of the battery. |
---|---|
College: |
Faculty of Science and Engineering |
Issue: |
3 |
Start Page: |
035003 |