Journal article 20 views 3 downloads
Coupled thermal-structural modelling and experimental validation of spiral mandrel die / Yi Nie; Ian Cameron; Johann Sienz; Yueh-Jaw Lin; Wei Sun
The International Journal of Advanced Manufacturing Technology, Volume: 111, Issue: 11-12, Pages: 3047 - 3061
PDF | Version of Record
This article is licensed under a Creative Commons Attribution 4.0 International LicenseDownload (3.42MB)
The conventional theoretical method to calculate deformations and stress states is only limited to a few cases of simple extrusion dies due to a number of assumptions and simplifications. A coupled thermal-structural modelling framework incorporating finite element method is thus developed and imple...
|Published in:||The International Journal of Advanced Manufacturing Technology|
Springer Science and Business Media LLC
Check full text
No Tags, Be the first to tag this record!
The conventional theoretical method to calculate deformations and stress states is only limited to a few cases of simple extrusion dies due to a number of assumptions and simplifications. A coupled thermal-structural modelling framework incorporating finite element method is thus developed and implemented to determine the mechanical performances of the complicated spiral mandrel die, which has a complex geometrical feature of spiral grooves and is exposed to severe conditions of thermal load and high pressure. The steady-state thermal analysis is carried out by mapping the temperature load on the flow channel from previously simulated flow characteristics of polymer melt. The structural analysis takes inputs from both thermal analysis and previously simulated pressure on polymer melt. Both the temperature and pressure loads on flow channel are transferred via the Smart Bucket Surface mapping algorithm. The mechanical properties of the spiral mandrel die are evaluated by analysing the deformation and stress distribution. The experimental validation is conducted to demonstrate the effectiveness of the numerical model. The effects of both structure parameters of the spiral mandrel and processing parameters upon the maximum stress in the die body and the maximum pressure induced deformation at the die orifice are investigated.
Spiral mandrel die; Coupled thermal-structural modelling; Finite element simulation; Pipe extrusion
College of Engineering