Journal article 279 views 113 downloads
Structural integrity of DEMO divertor target assessed by neutron tomography
Fusion Engineering and Design, Volume: 169, Start page: 112661
Swansea University Author: Llion Evans
PDF | Version of Record
Crown Copyright © 2021 This is an open access article under the Open Government License (OGL)Download (7.01MB)
DOI (Published version): 10.1016/j.fusengdes.2021.112661
The divertor target plates are the most exposed in-vessel components to high heat flux loads in a fusion reactor due to a combination of plasma bombardment, radiation and nuclear heating. Reliable exhaust systems of such a huge thermal power required a robust and durable divertor target with a suffi...
|Published in:||Fusion Engineering and Design|
Check full text
No Tags, Be the first to tag this record!
The divertor target plates are the most exposed in-vessel components to high heat flux loads in a fusion reactor due to a combination of plasma bombardment, radiation and nuclear heating. Reliable exhaust systems of such a huge thermal power required a robust and durable divertor target with a sufficiently large heat removal capability and lifetime. In this context, it is pivotal to develop non-destructive evaluation methods to assess the structural integrity of this component that, if compromised could reduced its lifetime. In this work we have demonstrated for the first time the feasibility of using neutron tomography to detect volumetric defects within DEMO divertor mock-ups with a spatial resolution of the order of hundreds of micrometers. Neutron tomography is applicable for studying complex structures, often manufactured from exotic materials which are not favourable for conventional non-destructive evaluation methods. This technique could be effectively used during research and development cycles of fusion component design or for quality assurance during manufacturing.
Divertor target, Tungsten, Monoblock, CuCrZr, Neutron tomography, Non-destructive evaluation, Qualification
Faculty of Science and Engineering
IMAT (DOI:10.5286/ISIS.E.RB1820093) facility.
This work has been carried out within the framework of the EUROfusion
Consortium and has received funding from the Euratom research and
training programme 2014–2018 under grant agreement No 633053,
from the RCUK Energy Programme [grant number EP/I501045] and
EPSRC [grant number EP/R012091/1].