No Cover Image

E-Thesis 272 views

Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway / Joana Amaral Duarte De Moura

Swansea University Author: Joana Amaral Duarte De Moura

Full text not available from this repository: check for access using links below.

DOI (Published version): 10.23889/SUthesis.62324

Abstract

This project aimed to construct a 3D dynamic model of the human air-blood barrier. The model was an assembly of the alveolar region of the human lung, and the associated vasculature on the basolateral side, all integrated into a bioreactor under fluid flow. The alveolar model aimed to include epithe...

Full description

Published: Swansea 2022
Institution: Swansea University
Degree level: Doctoral
Degree name: Ph.D
Supervisor: Clift, Martin J D. ; Doak, Shareen H. ; Muller, Iris
URI: https://cronfa.swan.ac.uk/Record/cronfa62324
Tags: Add Tag
No Tags, Be the first to tag this record!
first_indexed 2023-01-13T14:47:47Z
last_indexed 2023-01-13T19:23:41Z
id cronfa62324
recordtype RisThesis
fullrecord <?xml version="1.0"?><rfc1807><datestamp>2023-01-13T14:59:00.4096227</datestamp><bib-version>v2</bib-version><id>62324</id><entry>2023-01-13</entry><title>Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway</title><swanseaauthors><author><sid>8aaab6d4bf74b728fdd77352fc8a4a28</sid><firstname>Joana</firstname><surname>Amaral Duarte De Moura</surname><name>Joana Amaral Duarte De Moura</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2023-01-13</date><deptcode>BMS</deptcode><abstract>This project aimed to construct a 3D dynamic model of the human air-blood barrier. The model was an assembly of the alveolar region of the human lung, and the associated vasculature on the basolateral side, all integrated into a bioreactor under fluid flow. The alveolar model aimed to include epithelial cells, such as alveolar type I (NCI-H441 or hAELVi) and type II (A549), together with macrophages (PMA differentiated THP-1 (dTHP-1)). The biomaterial selected to mimic the alveolar region extracellular matrix was derived from the decellularization of human lung fibroblast cells, cultured into a sheet. To create the vasculature model, endothelial cells (HULEC 5a) were co-cultured with human lung fibroblasts (HLF-1) within a hydrogel. Two biomaterials were tested to support the growth of the vasculature model; (i) a gelatin and alginate mesh or (ii) a fibrin gel. Regarding the bioreactor, besides ensuring the sterility of the cellular model, the goal was to enable the culture of the alveolar in vitro model at the air-liquid interface (ALI) and the vascular model under fluid-flow dynamics. To achieve what was proposed above, the project was divided into three parts; the first focused on the alveolar model, where the development of the decellularized membrane, as well as the cell culture model are described in chapters 3 and 4. The decellularization procedure included several approaches to remove the DNA content. These consisted of freeze-thaw cycles and exposure to surfactants such as sodium dodecyl sulfate (SDS) and Triton. The decellularized extracellular matrix (dECM), was tested as a scaffold or cross-linked with riboflavin or fibrin to support the growth of NCI-H441, hAELVi, A549 and dTHP-1 cells. It was observed that only monocultures of A549 and dTHP-1 cells were able to grow and proliferate under both submerged and ALI conditions upon the dECM crosslink with fibrin (dECM/fibrin). The second part of the project addresses the vasculature model (chapter 5). The gelatin and alginate mesh was first investigated to support the endothelial cells (ECs) growth, but with a lack of success. Moving forward, the fibrin gel was investigated, where a range of concentrations of fibrinogen and thrombin were tested. After some final gel volume adjustment, the fibrin was able to support the ECs growth and proliferation. The fibrin gel was characterized regarding its rheology and porosity which, together with cell proliferation data, 2.5 mg/mL fibrinogen and 5 U/mL thrombin mix was selected to build the vasculature co-culture model within the bio-matrix. Once established, supplemented media was designed to induce angiogenesis, which was able to promote, in static conditions, cell organization into 3D geometries resembling tip cells and cord formation. Under dynamic conditions, the vasculature shows ECs with tip cell morphology, however, cord formation was lacking, as was fibroblast proliferation. Finally, the third part is comprised of the bioreactor design, fabrication and simulation. Multiple iterations were designed, created and tested (chapter 6). Initially, the first and second version of the bioreactor was constructed in acrylic or polycarbonate. Yet, this did not allow for the alveolar model positioning. Therefore, subsequent versions were manufactured in laser cut to ensure complete transparency of acrylic and included a silicone part where the cellular model was placed. Based on these findings, a complete model was created by integrating the alveolar and vasculature models into the bioreactor (chapter 7). Under fluid flow, the full model showed a complete A549 cell monolayer populated with dTHP-1 on the apical layer. Though, unfortunately, when combined with all parts together, the vasculature model showed a lack of cell viability and proliferation. In conclusion, the proposed model demonstrated the possibility to combine a diverse cell population with a physiologically relevant mechanical environment. The integrated model requires further optimizations, such as in the dECM biomaterial and a different cell source in the vasculature. However, a foundation to create a dynamic air-blood barrier system has been shown in order to gain further insight towards building anatomically and physiologically relevant non-animal models for next generation risk assessment.</abstract><type>E-Thesis</type><journal/><volume/><journalNumber/><paginationStart/><paginationEnd/><publisher/><placeOfPublication>Swansea</placeOfPublication><isbnPrint/><isbnElectronic/><issnPrint/><issnElectronic/><keywords>in vitro models, alveolar region, biomaterials</keywords><publishedDay>6</publishedDay><publishedMonth>12</publishedMonth><publishedYear>2022</publishedYear><publishedDate>2022-12-06</publishedDate><doi>10.23889/SUthesis.62324</doi><url/><notes/><college>COLLEGE NANME</college><department>Biomedical Sciences</department><CollegeCode>COLLEGE CODE</CollegeCode><DepartmentCode>BMS</DepartmentCode><institution>Swansea University</institution><supervisor>Clift, Martin J D. ; Doak, Shareen H. ; Muller, Iris</supervisor><degreelevel>Doctoral</degreelevel><degreename>Ph.D</degreename><degreesponsorsfunders>Unilever, grant number: MA-2016-02191N</degreesponsorsfunders><apcterm/><funders/><projectreference/><lastEdited>2023-01-13T14:59:00.4096227</lastEdited><Created>2023-01-13T14:17:37.7374153</Created><path><level id="1">Faculty of Medicine, Health and Life Sciences</level><level id="2">Medical School</level></path><authors><author><firstname>Joana</firstname><surname>Amaral Duarte De Moura</surname><order>1</order></author></authors><documents><document><filename>Under embargo</filename><originalFilename>Under embargo</originalFilename><uploaded>2023-01-13T14:53:43.2376710</uploaded><type>Output</type><contentLength>20240970</contentLength><contentType>application/pdf</contentType><version>E-Thesis &#x2013; open access</version><cronfaStatus>true</cronfaStatus><embargoDate>2023-12-06T00:00:00.0000000</embargoDate><documentNotes>Copyright: The author, Joana Leonor Amaral Duarte de Moura, 2022.</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language></document></documents><OutputDurs/></rfc1807>
spelling 2023-01-13T14:59:00.4096227 v2 62324 2023-01-13 Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway 8aaab6d4bf74b728fdd77352fc8a4a28 Joana Amaral Duarte De Moura Joana Amaral Duarte De Moura true false 2023-01-13 BMS This project aimed to construct a 3D dynamic model of the human air-blood barrier. The model was an assembly of the alveolar region of the human lung, and the associated vasculature on the basolateral side, all integrated into a bioreactor under fluid flow. The alveolar model aimed to include epithelial cells, such as alveolar type I (NCI-H441 or hAELVi) and type II (A549), together with macrophages (PMA differentiated THP-1 (dTHP-1)). The biomaterial selected to mimic the alveolar region extracellular matrix was derived from the decellularization of human lung fibroblast cells, cultured into a sheet. To create the vasculature model, endothelial cells (HULEC 5a) were co-cultured with human lung fibroblasts (HLF-1) within a hydrogel. Two biomaterials were tested to support the growth of the vasculature model; (i) a gelatin and alginate mesh or (ii) a fibrin gel. Regarding the bioreactor, besides ensuring the sterility of the cellular model, the goal was to enable the culture of the alveolar in vitro model at the air-liquid interface (ALI) and the vascular model under fluid-flow dynamics. To achieve what was proposed above, the project was divided into three parts; the first focused on the alveolar model, where the development of the decellularized membrane, as well as the cell culture model are described in chapters 3 and 4. The decellularization procedure included several approaches to remove the DNA content. These consisted of freeze-thaw cycles and exposure to surfactants such as sodium dodecyl sulfate (SDS) and Triton. The decellularized extracellular matrix (dECM), was tested as a scaffold or cross-linked with riboflavin or fibrin to support the growth of NCI-H441, hAELVi, A549 and dTHP-1 cells. It was observed that only monocultures of A549 and dTHP-1 cells were able to grow and proliferate under both submerged and ALI conditions upon the dECM crosslink with fibrin (dECM/fibrin). The second part of the project addresses the vasculature model (chapter 5). The gelatin and alginate mesh was first investigated to support the endothelial cells (ECs) growth, but with a lack of success. Moving forward, the fibrin gel was investigated, where a range of concentrations of fibrinogen and thrombin were tested. After some final gel volume adjustment, the fibrin was able to support the ECs growth and proliferation. The fibrin gel was characterized regarding its rheology and porosity which, together with cell proliferation data, 2.5 mg/mL fibrinogen and 5 U/mL thrombin mix was selected to build the vasculature co-culture model within the bio-matrix. Once established, supplemented media was designed to induce angiogenesis, which was able to promote, in static conditions, cell organization into 3D geometries resembling tip cells and cord formation. Under dynamic conditions, the vasculature shows ECs with tip cell morphology, however, cord formation was lacking, as was fibroblast proliferation. Finally, the third part is comprised of the bioreactor design, fabrication and simulation. Multiple iterations were designed, created and tested (chapter 6). Initially, the first and second version of the bioreactor was constructed in acrylic or polycarbonate. Yet, this did not allow for the alveolar model positioning. Therefore, subsequent versions were manufactured in laser cut to ensure complete transparency of acrylic and included a silicone part where the cellular model was placed. Based on these findings, a complete model was created by integrating the alveolar and vasculature models into the bioreactor (chapter 7). Under fluid flow, the full model showed a complete A549 cell monolayer populated with dTHP-1 on the apical layer. Though, unfortunately, when combined with all parts together, the vasculature model showed a lack of cell viability and proliferation. In conclusion, the proposed model demonstrated the possibility to combine a diverse cell population with a physiologically relevant mechanical environment. The integrated model requires further optimizations, such as in the dECM biomaterial and a different cell source in the vasculature. However, a foundation to create a dynamic air-blood barrier system has been shown in order to gain further insight towards building anatomically and physiologically relevant non-animal models for next generation risk assessment. E-Thesis Swansea in vitro models, alveolar region, biomaterials 6 12 2022 2022-12-06 10.23889/SUthesis.62324 COLLEGE NANME Biomedical Sciences COLLEGE CODE BMS Swansea University Clift, Martin J D. ; Doak, Shareen H. ; Muller, Iris Doctoral Ph.D Unilever, grant number: MA-2016-02191N 2023-01-13T14:59:00.4096227 2023-01-13T14:17:37.7374153 Faculty of Medicine, Health and Life Sciences Medical School Joana Amaral Duarte De Moura 1 Under embargo Under embargo 2023-01-13T14:53:43.2376710 Output 20240970 application/pdf E-Thesis – open access true 2023-12-06T00:00:00.0000000 Copyright: The author, Joana Leonor Amaral Duarte de Moura, 2022. true eng
title Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
spellingShingle Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
Joana Amaral Duarte De Moura
title_short Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
title_full Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
title_fullStr Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
title_full_unstemmed Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
title_sort Development of an advanced multi-cellular and dynamic flow model of the human alveolar airway
author_id_str_mv 8aaab6d4bf74b728fdd77352fc8a4a28
author_id_fullname_str_mv 8aaab6d4bf74b728fdd77352fc8a4a28_***_Joana Amaral Duarte De Moura
author Joana Amaral Duarte De Moura
author2 Joana Amaral Duarte De Moura
format E-Thesis
publishDate 2022
institution Swansea University
doi_str_mv 10.23889/SUthesis.62324
college_str Faculty of Medicine, Health and Life Sciences
hierarchytype
hierarchy_top_id facultyofmedicinehealthandlifesciences
hierarchy_top_title Faculty of Medicine, Health and Life Sciences
hierarchy_parent_id facultyofmedicinehealthandlifesciences
hierarchy_parent_title Faculty of Medicine, Health and Life Sciences
department_str Medical School{{{_:::_}}}Faculty of Medicine, Health and Life Sciences{{{_:::_}}}Medical School
document_store_str 0
active_str 0
description This project aimed to construct a 3D dynamic model of the human air-blood barrier. The model was an assembly of the alveolar region of the human lung, and the associated vasculature on the basolateral side, all integrated into a bioreactor under fluid flow. The alveolar model aimed to include epithelial cells, such as alveolar type I (NCI-H441 or hAELVi) and type II (A549), together with macrophages (PMA differentiated THP-1 (dTHP-1)). The biomaterial selected to mimic the alveolar region extracellular matrix was derived from the decellularization of human lung fibroblast cells, cultured into a sheet. To create the vasculature model, endothelial cells (HULEC 5a) were co-cultured with human lung fibroblasts (HLF-1) within a hydrogel. Two biomaterials were tested to support the growth of the vasculature model; (i) a gelatin and alginate mesh or (ii) a fibrin gel. Regarding the bioreactor, besides ensuring the sterility of the cellular model, the goal was to enable the culture of the alveolar in vitro model at the air-liquid interface (ALI) and the vascular model under fluid-flow dynamics. To achieve what was proposed above, the project was divided into three parts; the first focused on the alveolar model, where the development of the decellularized membrane, as well as the cell culture model are described in chapters 3 and 4. The decellularization procedure included several approaches to remove the DNA content. These consisted of freeze-thaw cycles and exposure to surfactants such as sodium dodecyl sulfate (SDS) and Triton. The decellularized extracellular matrix (dECM), was tested as a scaffold or cross-linked with riboflavin or fibrin to support the growth of NCI-H441, hAELVi, A549 and dTHP-1 cells. It was observed that only monocultures of A549 and dTHP-1 cells were able to grow and proliferate under both submerged and ALI conditions upon the dECM crosslink with fibrin (dECM/fibrin). The second part of the project addresses the vasculature model (chapter 5). The gelatin and alginate mesh was first investigated to support the endothelial cells (ECs) growth, but with a lack of success. Moving forward, the fibrin gel was investigated, where a range of concentrations of fibrinogen and thrombin were tested. After some final gel volume adjustment, the fibrin was able to support the ECs growth and proliferation. The fibrin gel was characterized regarding its rheology and porosity which, together with cell proliferation data, 2.5 mg/mL fibrinogen and 5 U/mL thrombin mix was selected to build the vasculature co-culture model within the bio-matrix. Once established, supplemented media was designed to induce angiogenesis, which was able to promote, in static conditions, cell organization into 3D geometries resembling tip cells and cord formation. Under dynamic conditions, the vasculature shows ECs with tip cell morphology, however, cord formation was lacking, as was fibroblast proliferation. Finally, the third part is comprised of the bioreactor design, fabrication and simulation. Multiple iterations were designed, created and tested (chapter 6). Initially, the first and second version of the bioreactor was constructed in acrylic or polycarbonate. Yet, this did not allow for the alveolar model positioning. Therefore, subsequent versions were manufactured in laser cut to ensure complete transparency of acrylic and included a silicone part where the cellular model was placed. Based on these findings, a complete model was created by integrating the alveolar and vasculature models into the bioreactor (chapter 7). Under fluid flow, the full model showed a complete A549 cell monolayer populated with dTHP-1 on the apical layer. Though, unfortunately, when combined with all parts together, the vasculature model showed a lack of cell viability and proliferation. In conclusion, the proposed model demonstrated the possibility to combine a diverse cell population with a physiologically relevant mechanical environment. The integrated model requires further optimizations, such as in the dECM biomaterial and a different cell source in the vasculature. However, a foundation to create a dynamic air-blood barrier system has been shown in order to gain further insight towards building anatomically and physiologically relevant non-animal models for next generation risk assessment.
published_date 2022-12-06T04:21:51Z
_version_ 1763754441313353728
score 11.012678

Similar Items