Journal article 855 views 149 downloads
Identifying Dominant Recombination Mechanisms in Perovskite Solar Cells by Measuring the Transient Ideality Factor
,
Matt J. Carnie,
Andrew M. Telford,
Brian C. O’Regan,
Jenny Nelson ,
Piers R.F. Barnes,
Matt Carnie
Physical Review Applied, Volume: 11, Issue: 4
Swansea University Authors:
Trystan Watson , Jenny Nelson , Matt Carnie
-
PDF | Version of Record
Distributed under the terms of a Creative Commons Attribution CC-BY 4.0 Licence.
Download (1.07MB)
DOI (Published version): 10.1103/PhysRevApplied.11.044005
Abstract
The light ideality factor determined by measuring the open-circuit voltage (V) as a function of light intensity is often used to identify the dominant recombination mechanism in solar cells. Applying this “Suns-V” technique to perovskite cells is problematic since the V evolves with time in a way th...
| Published in: | Physical Review Applied |
|---|---|
| ISSN: | 2331-7019 |
| Published: |
American Physical Society
2019
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa49970 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
The light ideality factor determined by measuring the open-circuit voltage (V) as a function of light intensity is often used to identify the dominant recombination mechanism in solar cells. Applying this “Suns-V” technique to perovskite cells is problematic since the V evolves with time in a way that depends on the previously applied bias (V), bias light intensity, device architecture and processing route. Here, we show that the dominant recombination mechanism in two structurally similar CH3NH3PbI3 devices containing either mesoporous Al2O3 or TiO2 layers can be identified from the signature of the transient ideality factor following application of a forward bias, V, to the device in the dark. The transient ideality factor is measured by monitoring the evolution of V as a function of time at different light intensities. The initial values of ideality found using this technique are consistent with estimates of the ideality factor obtained from measurements of photoluminescence vs light intensity and electroluminescence vs current density. Time-dependent simulations of the measurement on modeled devices, which include the effects of mobile ionic charge, reveal that this initial value can be correlated to an existing zero-dimensional model while steady-state values must be analyzed taking into account the homogeneity of carrier populations throughout the absorber layer. The analysis shows that Shockley-Read-Hall (SRH) recombination through deep traps at the charge-collection interfaces is dominant in both architectures of measured device. Using transient photovoltage measurements directly following illumination on bifacial devices, we further show that the perovskite–electron-transport-layer interface extends throughout the mesoporous TiO2 layer, consistent with a transient ideality signature corresponding to SRH recombination in the bulk of the film. This method will be useful for identifying performance bottlenecks in alternative variants of perovskite and other mixed ionic-electronic conducting absorber-based solar cells. |
|---|---|
| Keywords: |
Energy research, Optoelectronics, Semiconductor Physics |
| College: |
Faculty of Science and Engineering |
| Issue: |
4 |